Availability: | |
---|---|
Quantity: | |
High Quality Design
1.Independent Air Duct
The AD10 series adopts an independent cooling air duct design across the entire power range, effectively preventing external contaminants from entering the inverter and causing short circuits or other faults, thereby enhancing reliability.
2.High Protection Design
The core components are selected with higher-quality elements, and the circuit board adopts an automated triple protective coating process to enhance environmental adaptability and improve its protection capability.
3.External Keyboard
AD10 full power range can be externally connected to a keyboard (LD350 series keyboard is optional) to facilitate on-site installation and debugging by customers
4.Braking Unit as Standard for All Series
Reduce the space occupied by the equipment, and only need to configure the corresponding braking resistor to achieve energy consumption braking
5.EMC Configuration
Optional built-in C3 filter improves power factor, effectively suppresses high-frequency harmonics, reduces electromagnetic interference (EMI), and ensures that the equipment complies with electromagnetic compatibility standards
High Performance
1.New Generation Control Platform
Can drive ordinary three-phase asynchronous motor, variable frequency motor, permanent magnet synchronous motor, etc.
2.Excellent Energy-saving Control
Using next-generation energy-saving control technology, it optimizes excitation current based on load demand, maximizing motor efficiency and reducing energy and motor losses.
3.Comprehensive Protection Features
Overcurrent, overvoltage, undervoltage, overtemperature, phase loss, overload and other protection functions
Model Description
Function | Specifications | |
Input | Input Voltage | AC1PH220V(-15%)~240V(+10%) AC3PH220V(-15%)~240V(+10%) AC3PH380V(-15%)~440V(+10%) |
Input Frequency | 50/60Hz, Allowed range: 47-63Hz | |
Output | Output Frequency | 0-400Hz |
Technical control feature | Control Mode | V/F, SVC |
Motor Type | Asynchronous Motor (AM), Permanent magnet synchronous motor (PMSM) | |
Speed Ratio | 1:200(SVC) | |
Speed control accuracy | ±0.5% (SVC) | |
Starting torque | 0.5Hz/150% (SVC) | |
Overload capacity | 150% of the rated current for 60s, 180% of the rated current for 3s | |
Running control feature | Frequency setting method | Setting through keypad digital, analog, multi-step running, simple PLC, PID, and Modbus communication. Setting combinations and setting channels can be switched |
Automatic voltage regulation | Able to keep constant output voltage even when the grid voltage changes | |
Fault protection | Including protection against overcurrent, overvoltage, undervoltage, overtemperature, overload,phase loss, and short circuit | |
Peripheral interface | Analog input | 1 inputs. AI1: 0-10V/0-20mA |
Analog output | 1 output. AO1: 0-10V/0-20mA/4-20mA (Optional) | |
Digital input | 5 regular inputs. Max. frequency: 1kHz 1 high-speed input. Max. frequency: 50kHz | |
Digital output | 1 HDO terminal open collector output | |
Relay output | 1 programmable relay outputs TA1: NO; TB1: NC; TC1: common Contact capacity: 3A/AC250V, 1A/DC30V | |
Other | Altitude | <1000m |
Temperature of storage | -20-65°C | |
Temperature of running environment | -10-40°C | |
RH | 20- 90% RH, No condensation | |
IP rating | IP20 | |
Braking unit | Embedded braking unit as standard configuration | |
EMC flter | Optional built-in C3 filter | |
Installation method | Wall mounting | |
Cooling method | Forced air cooling | |
Certification standard | CE |